What are the Precautions When Removing the Cardan Shaft?Author : hani Time : 2020/02/03
What are the Precautions When Removing the Cardan Shaft?
In the process of disassembling the cardan shaft, the two things are different. The cardan shaft also needs to be assembled during assembly. When using the cardan shaft, the torque transmission is safer. When disassembling the shaft, it is usually used for equipment failure or maintenance. The unit of the shaft must be divided into different parts. If the function will be lost, the lubrication of the drive shaft and the pressure cannot be completed, the external operation of the drive shaft will lose the drive shaft formed by the film And then when there is wear, there is wear.
If the temperature difference of cardan shaft changes, a touch will be applied, and different packaging States will appear after the machine unit stops working. If the cardan shaft machine does not stop working at this time, it is difficult to avoid damaging parts, different types of cardan shaft, and different equipment, regardless of the cardan shaft or other details, should be noted, the user must consider the selection factors of cardan shaft, To explain the knowledge of cardan shaft, it is necessary to consider the shape of the main motor unit and the type of analytical load of the selected cardan shaft.
For the assembly and requirements of cardan shaft, the perpendicularity can also be tilted for assembly. The angle of cardan shaft must be handled as soon as possible. If the component is tilted, the vertical angle and plane angle must be known. The user must consider whether the assembly position is limited. The assembly length is about necessary to pay attention to expansion and contraction. When the cardan shaft shrinks, it extends in a small way, which is necessary to consider Considering the size difference relative to the cardan shaft without reducing it and identifying the internal area of the equipment, the cardan shaft cannot be overloaded for a long time.
For the rotation diameter of the cardan shaft, this means that when the shaft rotates, it makes the appearance of the cardan shaft and the reference plane more reliable. During the operation of the drive shaft, when the machine is running, the main or secondary shaft is located on the same central line, and the precise alignment of the drive shaft also affects the normal operation of the drive shaft equipment, especially the higher the speed of the equipment, the more prominent the importance of the equipment, and the relative parts of the joint shaft It is relatively common, especially for continuous operation devices that need to keep accurate correspondence.