- Bar & Tel Çubuk Haddeleme Fabrikası
- Sürekli Bölüm Haddeleme
- InterMediate Rolling MIll
- Re-Bar Haddehane
- Kaba Haddehane
- Çelik Şerit Liyayıl Maaları Üniteleri
- Kesme Makinesi & Sıcak Testereler
- Elektrik Ark Fırını
- Çelik Taşlama Makinesi
- Yedek Parça
As a professional China track switcher for Rolling Mill manufacturer, we are equipped with a famous factory and plant and engineers with decades experience, as well as providing with CCM Machine, TMT Re-bar Mill, Wire Rod Mill, finishing mill, rolling mill stand, hot rolling mill, section rolling mill, etc.for sale, welcome to visit and check the process and layout with Xi’an Hani Tech Co., Ltd.
Equipment Composition and Use
Track switcher is composed of the body, support, and air cylinder.
It is behind the 3# flying shear, used to import rolled piece into the finishing mill and import scrap into chopping shear.
|Diameter of the|
to be collected
after being snapped
track switcher cylinder
The Effect of Track Switcher
Track switcher is behind the 3# flying shear, being composed by upper and lower switchable groove, the finished product will be switched to the finishing mill through the lower groove and the waste will be switched to the collecting device through the upper groove. The upper groove is connected with snap shear while the lower groove is connected with finishing mill.
The collecting device is composed of two waste boxes and one chute and located beneath the track switcher and snap shear to collect the waste processed by flying shear and snap shear.
Structure and Operation
The switch of the upper groove and lower groove is realized through the left and right movement of the track switcher driven by a cylinder when the track switcher is in the upper position, it is “the position for steel to feed in”, the lower position is for waste to get off. When flying shear is cutting the head of the steel, track switcher is in the condition to let the steel to get in, then, the lower groove forward the rolling part to other shears, when the rolling parts get into the finishing mill, railroad switch turn to the position to let the waste get off in case any failure occurs and forward the rolling element behind the former into the snap shear. If the rolling part gets into the bar mill and things go well, track switcher turns to the position to let the steel get in to wait for the next rolling parts.
Lubrication and Pneumatic:
Glycerol manual lubrication is applied for transmission parts of track switcher.
The air used in brakes is supplied by the workshop, the pressure of compressed air is 0.4～0.6Mpa.
- Professional service will be provided
- We can supply foundation layout and arrangement diagram
- After-sales service provided, we will send engineers to your factory to install and debug the machines
- Competitive price & excellent quality
- Our machines are easy operation and maintenance
- Lower investment
- Steady performance
- Products are customized for different needs
- Production capability can be adjusted according to customers' request
- Low energy consumption
As a professional Track Switcher for Rolling Mill manufacturer in China, We can supply designing, manufacturing, installation, and commissioning of the equipment with “turn-key” service. We can also design, manufacture and revamp other non-standard requirements according to the requirements of users.
Please send us more information about your project, we would like to give you our proposal immediately after getting your details. Sincerely welcome you to come and visit our plant.
Lütfen aşağıdaki formda sorgulama yapmakiçin çekinmeyin. 24 saat içinde size cevap vereceksiniz.
Roller is an important part of rolling mill. According to the ...
Since 1981 Hani Tech has been producing cardan shaft （univers...
There are various methods for classifying rolls, which are: ...
Function: Side loop is before finishing mill group, function i...