- Бар и проволочный стержневой прокатный стан
- Проволочные стержневые мельницы
- Линия по производству стержней и арматуры из композитной проволоки
- Продажа подержанных проволочных стержней Мельница для продажи
- Секонд-хенд проволочный стержень мельницы
- Рулон с зажимом для скорости прокатки 135 м/с
- Коробка передач с увеличенной скоростью 90 м отделочной фабрики
- Непрерывная секционная прокатка
- InterMediate Rolling MIll
- Ребарный прокатный стан
- прокатный стан
- Блоки прокатного стана стальных полос
- Стригальная машина и горячие пилы
- Дуговая электропечь
- Сталешлифовальный станок
- Запасные части
Cemented carbide roll collar (also called tungsten carbide rollers) refers to the roll made from tungsten carbide and cobalt by powder metallurgy. Tungsten carbide rollers are available in both integral and combined versions. They have excellent performance, stable quality, high processing precision, good wear resistance, and high impact resistance.
With the increasingly fierce competition in the quality and price of steel products, steel companies are constantly updating their equipment technology to continuously increase the rolling speed of rolling mills. At the same time, how to reduce the rolling mill downtime and further improve the effective operation rate of rolling mills? It has become an important topic for rolling steel engineers. The use of roll materials with higher rolling life is one of the important means to achieve this goal.
Due to its good wear resistance, high-temperature red hardness, thermal fatigue resistance, and high strength cemented carbide rolls have been widely used in the production of wire rods, rebars and seamless steel tubes, which greatly improved the work efficiency of the rolling mill. A variety of different grades of carbide rings have been developed based on the differences in the working conditions of the different racks and rolls.
Tungsten carbide rollers can be divided into solid carbide rolls and composite hard alloy rolls according to the structure. Solid carbide rolls have been widely used in pre-finishing and finishing stands for high-speed wire rod mills (including fixed reduction racks, pinch roll stands).
The composite cemented carbide roll is made of cemented carbide and other materials and can be divided into hard alloy composite roll ring and solid carbide composite roll. The cemented carbide composite roll ring is mounted on the roller shaft; for the solid carbide composite roll, cemented carbide roll ring is directly cast into the roll shaft to form an entirety, which is applied to the rolling mill with the large rolling load.
The tungsten carbide rollers have high hardness, and its hardness changes very little with temperature changes. The hardness at 700 °C is 4 times that of high-speed steel; and the elastic modulus, compressive strength, flexural strength, and thermal conductivity are also over 1 times higher than tool steel.
Since the thermal conductivity of the cemented carbide roll is high, the heat dissipation effect is good, and the time at which the surface of the roll is at a high temperature is short so that the high-temperature reaction time between the roll and the harmful impurities in the cooling water is short. Therefore, the cemented carbide roll is more resistant to corrosion and cold and hot fatigue than the tool steel roll.
Пожалуйста, не стесняйтесь дать ваш запрос в форме ниже. Мы ответим Вам в течение 24 часов.
Roller is an important part of rolling mill. According to the ...
Since 1981 Hani Tech has been producing cardan shaft （univers...
There are various methods for classifying rolls, which are: ...
Track switcher is behind the 3# flying shear, being composed b...