- Bar & Wire Rod Rolling Mill
- Continuous Section Rolling
- InterMediate Rolling MIll
- Re-Bar Rolling Mill
- Roughing Rolling Mill
- Steel Strip Rolling Mill Units
- Electric Arc Furnace
- Rolling Mill Rolls
- Shearing Machine & Hot Saws
- Steel Grinding Machine
- Spare Parts
The HC-type of single-stand reversible six-roll cold rolling mill, with positive, negative bending rolls equipped on the work rolls. The pre-uncoiler and the front and rear tension coiler, thick gauges, laser speedometers are equipped to achieve large tension rolling, ensuring high-speed and stable production of thin gauge products.
Finished Product Parameters
Material Thickness Max3.5mm Finished thickness 0.50-0.15mm Material Width Max1250mm Coil Width Max1250mm Inside Diameter 508mm Inside Diameter Φ508mm Outer Diameter 900-1800mm Outer Diameter Φ900-2000mm Material Weight Max20Ton Coil Weight Max20Ton
2. Equipment configuration
No. Device name Unit Quantity Note 1 Uncoiler Set 1 Customized 2 Pinch straightener Set 1 Customized 3 Entrance coiler Set 1 Customized 4 Entrance machine platform Set 1 Customized 5 Rolling mill noumenon Set 1 Customized 6 Rolling mill drive Set 1 Customized 7 Exit process platform Set 1 Customized 8 Exit coiler Set 1 Customized 9 Rolls System Set 1 Customized 10 Middle Roll Shifting Set 2 Customized 11 Bending roll and balancing device Set 4 Customized 12 Oil removal unit Set 2 Customized 13 Tension testing roller Set 2 Customized 14 Turning Roll Set 2 Customized 15 Roll Change Device Set 1 Customized
Characteristics of rolling mill
1. Tension coiler is set before and after the rolling mill to realize large tension reversible rolling.
2. X-ray thickness gauge and laser speed gauge were set before and after the rolling mill.
3. AGC uses high-speed controller SIEMENS FM458 and hydraulic servo system to achieve high accuracy and fast response. With the laser velocimeter, accurate second mass flow AGC control is achieved.
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
Contact thickness gauge is a kind of high precision metal plat...
There are two types of 18-roll hydraulic rolling mill----Z-hig...
Off-set 8-Hi Strip Mill is driving by support roller, deviatio...
4-Hi Rolling Mill Application and characteristics 1. Suitab...