- Bar & Wire Rod Rolling Mill
- Continuous Section Rolling
- InterMediate Rolling MIll
- Re-Bar Rolling Mill
- Roughing Rolling Mill
- Steel Strip Rolling Mill Units
- Electric Arc Furnace
- Rolling Mill Rolls
- Shearing Machine & Hot Saws
- Steel Grinding Machine
- Spare Parts
There are two types of 18 roll hydraulic rolling mill—-Z-high type and S-high type, in which 4 sets of side support devices are added to the HC six roll mill. The rolling mill is suitable for processing stainless steel, carbon steel and non-ferrous metal strips.
Our company has independently developed and designed cost-effective products, and many sets have been put into use.
The unit has high speed, stability and high quality; the minimum rolling thickness is 0.15mm and the speed is 800m/min; it has intermediate roller traverse and hydraulic bending function; the consumption per ton of steel is 80% of the traditional equipment, and the performance is superior to the same type of imported products.
|Raw Materials||Finished product|
|Material Thickness||Max3.5mm||Finished thickness||0.50-0.15mm|
|Material Width||Max1250mm||Coil Width||Max1250mm|
|Inside Diameter||508mm||Inside Diameter||Φ508mm|
|Outer Diameter||900-1800mm||Outer Diameter||Φ900-2000mm|
|Material Weight||Max20Ton||Coil Weight||Max20Ton|
2. Equipment configuration
|4||Entrance machine platform||Set||1||Customized|
|5||Rolling mill noumenon||Set||1||Customized|
|6||Rolling mill drive||Set||1||Customized|
|7||Exit process platform||Set||1||Customized|
|10||Side pull Rolls||Set||4||Customized|
|11||Middle roll Shifting||Set||2||Customized|
|12||Bending roll and balancing device||Set||4||Customized|
|13||Oil removal unit||Set||2||Customized|
|14||Tension testing roller||Set||2||Customized|
|16||Roll change device||Set||1||Customized|
The characteristics of 18 rolling mill
1. High rigidity and high precision;
2. Plate shaped middle roll bending roll and middle roll to adjust;
3. Automatic hydraulic adjustment of rolling line;
4. Roll mileage management;
5. The unit adopts Siemens PLC control, AC and DC drive control;
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
The HC-type of single-stand reversible six-roll cold rolling m...
The four-roll hydraulic precision rolling mill is widely used ...
1. Apply to carbon steel, special steel, and another strip rol...
This machine is used to roll raw material thickness ≤ 4 mm, wi...