Products
News
-
Main Causes and Solutions of Vibration of Laying Head
The main reasons for the vibration of the wire rod mill laying head (laying head pipe) and the solutions are as follows:(1) The vibration of the body caused by the fluctuation of motor speed should be optimized or the rolling process should be optimized; (2...
MORE -
Advantages of Walking Beam Reheating Furnaces
Compared with the push-steel reheating furnace, the walking beam reheating furnaces have the following advantage: (1) The billets heated is not limited by the shape and size of cross-section, so push-steel reheating furnace can be heated. Large slabs, speci...
MORE -
Hot Tinning Plating Production Process
What is tinplate? How about the production process of hot tinning? By hot dipping or electrolytic processing, the process of making the surface of cold rolled sheet firmly adhere to a layer of dissimilar metals is called plating process. Tin-plated thin ste...
MORE -
Cold Rolling Methods
What are the methods of cold rolling? The production methods of cold rolling can be divided into single sheet rolling and coil rolling. (1) Single sheet rolling. The two-roll mill was first used in monolithic rolling, and four-roll cold rolling mill is wide...
MORE -
Sendzimir Mill
The essential difference between Sendzimir mill (Sendzimir cold rolling mill) and other types of the mill is the direction of rolling force transmission. The rolling force of Sendzimir mill is transferred from the working roll through the intermediate roll ...
MORE -
High-speed Wire Rod Mills Production Process Characteristics
The development of high-speed wire rod mills started with the improvement of finishing mill and controlled cooling technology. The high-speed rolling mill has been widely used in the transformation of small and wire rolling mills since its mature production...
MORE