Products
-
Rolling Mills 2019 Canton Fair Invitation
Visit us at Canton Fair. Consultant for High-speed Bar Mill & Wire Rod Block Mill with "Turn-key" Solution.
MORE -
Main Methods of Wire Rod Rolling
Horizontal wire rod mills rolling. It consists of a multi-row mill with each column driven by a motor. The rotate speed of each rack of the same column is the same, and the steel is fed by manual or disk in each frame for loop rolling. Semi-continuous wire ...
MORE -
The Cause of Rolling Mill Rolls Breakage
The rolls of rolling mill may break in practical application. According to the analysis of fracture phenomena, the main part of fracture is mainly concentrated in the roll ring, and the fracture section is irregularly inclined or a vertical section. So why ...
MORE -
Main Causes and Solutions of Vibration of Laying Head
The main reasons for the vibration of the wire rod mill laying head (laying head pipe) and the solutions are as follows:(1) The vibration of the body caused by the fluctuation of motor speed should be optimized or the rolling process should be optimized; (2...
MORE -
Advantages of Walking Beam Reheating Furnaces
Compared with the push-steel reheating furnace, the walking beam reheating furnaces have the following advantage: (1) The billets heated is not limited by the shape and size of cross-section, so push-steel reheating furnace can be heated. Large slabs, speci...
MORE -
Hot Tinning Plating Production Process
What is tinplate? How about the production process of hot tinning? By hot dipping or electrolytic processing, the process of making the surface of cold rolled sheet firmly adhere to a layer of dissimilar metals is called plating process. Tin-plated thin ste...
MORE -
Cold Rolling Methods
What are the methods of cold rolling? The production methods of cold rolling can be divided into single sheet rolling and coil rolling. (1) Single sheet rolling. The two-roll mill was first used in monolithic rolling, and four-roll cold rolling mill is wide...
MORE